Scan for mobile page
QR
Plastic recycling
Special mixer for PVC
High performance requirements, new properties of raw materials, sequence of technological processes or increasing quality requirements - there are many reasons for adjusting the parameters of the production line. Often, quality preparation of the first step in the technological chain of the material is not considered properly. However, a well-optimized mixture is the basis of a highly reproducible result. The function of these mixers is to ensure uniform and equal distribution of stabilizers, oil-based materials and modifiers. This mixer turns the mixture into a dust-free, dry state.
The heating mixer is designed to heat and mix the material and all parts to a temperature of 110 C to 130 C for 5-8 minutes. This process binds all compounds to the material particles. However, at this temperature, bonding waxes are still somewhat viscous and the composite tends to not compress under pressure. Therefore, the mixture is transferred from the heating mixer to the cooling mixer, where it is cooled to about 40 C. After that, the mixed material is cooled in a vertical cooling mixer. In the next step, the mixed material can be used for ensiling and further processing including extrusion.
Price
$15,700
A
Aziz Karimov
I reply within 12 minutes
Specifications
| Produced | China |
| Voltage | 380v 50hz |
| Motor power | 11, 55 kw/h |
| Mixing time | 8-12 minutes |
| Mixing steps | 2 stage |
| hot or cold mixing function | there is |
| Control Panel | PLC control panel |
| Heat up | 12kw/h |
| Hot mixer volume | 300L |
| Mixer rotation speed | 475-950 r/min |
| Cold mixer volume | 600L |
| Product release method | Pneumatically |
| Volume of product at one time | Around 100kg |
| Production volume | 450-500kg/h |
| Size | 2500*2100*3800 mm |
| Weight | 3000 kg |
Description
https://youtu.be/xsa21SmgiC0
