Scan for mobile page
QR
Construction equipment
Whipped polyethylene tubes production line for insulation
Polyethylene pipes whipped for insulation are an excellent insulation tool for heating systems, hot and cold water supply and sewage systems.
Pipe wall thickness: 15 mm. Inner diameter: from 6 mm to 86 mm. The Material is moisture-resistant, retains its physical and chemical properties, does not mold, does not rot, is oil and gasoline-resistant, flexible and lightweight, easy to install and glue.
Price
$49,000
A
Aziz Karimov
I reply within 12 minutes
Specifications
| Delivery speed | 200 kg / h |
| Motor power | 0.75 kw |
| Delivery height | Up to 3 meters |
| Delivery speed | 0.5-2 kg / h |
| Motor (explosion proof | Motor, Brand: Siemens |
| Motor power | 22 kW |
| Reducotor | Polished metal |
| Schesterna material | high quality steel |
| Surface hardness | 54-62 HRC |
| Accuracy | Class 6 |
| Screw diameter | Daschatlari75mm |
| Screw material | Given nitrogen ishkov. Surface hardness above 38CRMNALA HV900 |
| Heating zones | Zone 8 |
| Heating circle material for plasticizing part | stainless steel |
| Circle material for the cooling part | explosion-proof cast aluminum |
| Cooling method | With water |
| Pump type | High pressure |
| Type of foam-forming equipment | Diluted butane dosing pump |
| Transfer rate | 16L / hour |
| Output pressure | 10-30 Mpa |
| Motor (explosion proof | 2.2 kw |
| Pump type | Superior |
| Single cylinder anti-compression gear type | Dispensed glycerin monostearate dosing pump |
| Transfer rate | 3.6 L/H |
| Dosage container size | 10L |
| Engine power | 0.75 kW |
| Hydraulics station | 1 vol. |
| Electrical appliances and pipes | 1 set per engine |
| Motor power | 3 kw |
| Structure | Round extruder has adjustable and pressure measuring device output head |
| Materials | Thermally machined high quality steel |
| Temperature control zone | Zone 3 |
| Temperature control accuracy | ±1° C |
| Heating power | 3 kw |
| Water cooling system in the head part | Available |
| Cooling type | Using an air loop |
| Fans | 3pcs x 0.33 kw |
| Cooling ring diameter | Depending on the diameter of the product |
| Capacity | 2.2 kw |
| Cooling type | Air ring |
| Speed control system | Available |
| Length measurement system | Available |
| Management system | Available |
| Length | 3 m |
| Kuvai | 1,5 kVt |
| Watercourse | 50m3 / so |
| Size | 2215x2215x2830 mm |
| Fan diameter | 1400 mm |
| Motor power | 1.5 kw |
| Motor power | 7,5 kVt |
| Size | 180 L |
Description
Features of insulation pipes:
- Reliably protects against condensation and heat loss.
- Environmentally friendly, safe to use, does not require the use of personal protective equipment.
- Materials do not burn
- Swallows noise.
- Resistant to moisture.
- Significantly reduces heat losses, which ultimately saves money.
- Operating temperature range: -40 to +90 ° C.
- The service life is 50 years.
Overview of the line
Equipment and devices within the line
Automatic raw material delivery equipment
Automatic raw material (powder-shaped) conveying equipment
Extruder equipment
Bhutan delivery system
Anti-compression system (GMs pump)
Automatic high speed hydraulic setka change system
Extruder head (golovka) and mold
Air cooling ring
Pipe pulling and cutting equipment
Conveyor
Management system
- The control system is equipped with an air cooling fan to ensure that all electrical components work in good condition.
- To ensure that the equipment always works in the best condition, all parts in the electric control Cabinet have been used from internationally famous brands.
Tower for cooling with water
